14mm Drill Hole Dust Extractor

Clean out drilled holes fast and properly. This nozzle fits Ryobi wet/dry vacuums with a 35mm hose connection, including the RVC-1220L-G and reaches deep into masonry and concrete holes to pull out drilling dust before you set anchors, screws or chemical fixings. A clean hole lets a mechanical anchor seat to full depth and lets resin bond to the concrete instead of the dust.

14mm is the hole size for M12 chemical anchor studs set with Ramset ChemSet or Hilti HIT-HY 200. Check your anchor data sheet to confirm the drill size.

Features

• Fits Ryobi wet/dry vacuums with a 35mm hose connection, including the RVC-1220L-G
• Slim 14mm tip for 14mm and larger holes with a bendable tip for awkward positions
• 140mm reach for clearing deep holes
• Works on dust from concrete, brick, block and other masonry
• Designed and 3D printed in Australia

What you get

• 1 x 14mm Drill Hole Dust Extractor for Ryobi RVC vacuums

Made to order. Printed for your order and dispatched within 1 to 3 business days via Australia Post, Australia wide.

See the full hole size and anchor chart, with manufacturer data sheets.

Prolonged or heavy use may cause premature wear on your vacuum. Use at your own discretion. Industrial Printworks is not affiliated with, authorised by or endorsed by Ryobi. Ryobi is trademarks of their respective owners and are referenced only to indicate compatibility.