Instant 3D print quote

Upload your file, pick a material and get a price straight away. Printed to order in NSW and shipped Australia wide. Every file is checked by hand and the final price confirmed before anything prints. Nothing is charged until you approve it.

Instant 3D print price

Upload your file, pick a material and colour, and the price updates as you go.

1 Upload
2 Choose
3 Send

Drop your files here or tap to upload STL, OBJ, STEP or 3MF. Up to 10 files, 25 MB each. Largest part: 350 × 350 × 310 mm in PLA or PETG, 325 × 320 × 325 mm in other materials, 300 × 320 × 320 mm in multi-colour.

How it works

Upload your model. We measure it and work out the plastic and print time it needs.
Choose material, colour, strength and quantity. The price updates as you go.
Pay now, or send it to us for a price check first. Either way we check every file by hand before we print.

Not sure what to pick?

Start here. We check every order and will tell you if a setting doesn't suit your part.

Strength: how solid inside

Light: Phone stands, desk organisers, display pieces, figurines and props.
Standard: Most everyday parts. Brackets, clips, covers and boxes.
Strong: Parts that carry weight or get screwed down. Mounts, hinges, tool holders.
Solid: Rarely needed. Small hard-working parts like spacers, bushes and small gears.

Most of a part's strength comes from its outer walls, not the inside. A phone stand is plenty strong on Light. Going up to Strong mostly adds plastic, time and cost.

Material: what it needs to handle

PLA, PLA Matte, PLA Silk: Indoor things, models and gifts. Best value. Softens in a hot car or full sun.
PETG, PCTG: Tougher with a bit of flex. Good for the garden, shed and garage.
ASA: Outdoors and in the sun. Handles UV and heat. Good for car, boat and trailer parts.
ABS, ABS-GF: Heat resistant and easy to sand or paint.
TPU: Flexible and rubbery. Seals, bumpers, grips and feet.
Carbon and glass fibre (CF, GF, PA6, PC): Stiff engineering grades for jigs, fixtures and hard-working parts. Higher heat and wear resistance.

Colour: any Siddament filament

All our filament comes from Siddament, an Australian filament supplier. If it's in stock there, we can print with it.

Pick a basic colour, or choose Other Siddament colour and paste the SKU from the product page (it looks like 13.009). A link to the product works too.

Finish: smooth or quick

Draft: Quickest and cheapest. You'll see the layer lines. Fine for prototypes and hidden parts.
Standard: The right choice for most things.
Fine detail: Smoother curves and small detail. Slower, so it costs more.

Multi-colour

Choose Multi-colour, set how many colours (up to 4) and pick each one. Colour 1 is the main body colour.

Tell us which colour goes where in the notes, or upload a 3MF with the colours already painted on.

Getting your file right

Check the size shown under the file name. If it looks 25 times too small, switch Model units to Inches.

Keep walls at least 1.2 mm thick.

Holes can print slightly small. If something has to fit, tell us the size it needs to be in your notes.

No need to orient the part or add supports. We set that up for the best result.

Turnaround

StandardDispatched in 3 to 5 business days

Express (+50%)Dispatched in 2 business days

Your price

Upload a model to see a price.

Pay now and we still check every file before printing. If we can't print it, you get a full refund. Or get your price checked first and nothing is charged until you approve it.

Trade and bulk work

The tool prices one-off and small batch parts on the spot. For production runs, site-specific tooling or anything that needs design work first, see custom and bulk orders or email us with what you need.